Search in Category
Filter Your Search
Shop by Category
Hydraulic Hose Assemblies
2"X20" UNIFLON-SS X SSMNPT X SS150LB FLG
2” I.D. special chemical service composite hose built to meet the demands of today’s highly aggressive media. Superior chemical resistance is achieved with a Teflon® PTFE inner liner, reinforced with multiple plies of polyester and polypropylene films which form the composite construction. Rated for full vacuum.
Available in diameters from 1” to 10”
Operating Temperature: -40ºF to +240ºF / -40ºC to +115ºC
Maximum Length: 100 feet. (10” – 80 ft.)
2"X30" UNIFLON-SS X SSSANTCX SS150LB FLG
2” I.D. special chemical service composite hose built to meet the demands of today’s highly aggressive media. Superior chemical resistance is achieved with a Teflon® PTFE inner liner, reinforced with multiple plies of polyester and polypropylene films which form the composite construction. Rated for full vacuum.
Available in diameters from 1” to 10”
Operating Temperature: -40ºF to +240ºF / -40ºC to +115ºC
Maximum Length: 100 feet. (10” – 80 ft.)
2"X48" UNIFLON-SS X SSMNPT X SS150LB FLG
2” I.D. special chemical service composite hose built to meet the demands of today’s highly aggressive media. Superior chemical resistance is achieved with a Teflon® PTFE inner liner, reinforced with multiple plies of polyester and polypropylene films which form the composite construction. Rated for full vacuum.
Available in diameters from 1” to 10”
Operating Temperature: -40ºF to +240ºF / -40ºC to +115ºC
Maximum Length: 100 feet. (10” – 80 ft.)
2"X60" UNIFLON-SS X SSMNPT X SS150LB FLG
2” I.D. special chemical service composite hose built to meet the demands of today’s highly aggressive media. Superior chemical resistance is achieved with a Teflon® PTFE inner liner, reinforced with multiple plies of polyester and polypropylene films which form the composite construction. Rated for full vacuum.
Available in diameters from 1” to 10”
Operating Temperature: -40ºF to +240ºF / -40ºC to +115ºC
Maximum Length: 100 feet. (10” – 80 ft.)
3"x12FT HOT TAR & ASPHALT MNPT E/E
3” I.D. Hot Tar and Asphalt Hose. Designed for the transfer of tar, asphalt, hot oils and other high temperature petroleum based products. Measuring 12Ft with Male NPT on Each End rated for 150 working pressure PSI.
Construction:
Tube: Black high grade nitrile rubber
Reinforcement: Plies of polyester tire cord with helix wire
Cover: Smooth black abrasion resistant nitrile
Length: 100 ft.
Temperature Range: -40° to +350°F
(Intermittent service only)
3"x15FT HOT TAR & ASPHALT MNPT E/E
3” I.D. Hot Tar and Asphalt Hose. Designed for the transfer of tar, asphalt, hot oils and other high temperature petroleum based products. Measuring 15Ft with Male NPT on Each End rated for 150 working pressure PSI.
Construction:
Tube: Black high grade nitrile rubber
Reinforcement: Plies of polyester tire cord with helix wire
Cover: Smooth black abrasion resistant nitrile
Length: 100 ft.
Temperature Range: -40° to +350°F
(Intermittent service only)
1.5" UNI-OIL GG X 6FT - MNPT E/E
72” OAL – 1-1/2” Composite Hose with 1-1/2” Male NPT fittings on Each End
Operating Temperature: -40 to +212 Degrees F
1.5" UNI-OIL GG X 12FT - MNPT E/E
144” OAL – 1-1/2” Composite Hose with 1-1/2” Male NPT fittings on Each End
Operating Temperature: -40 to +212 Degrees F