2-1/2" GLIDETECH® PTFE BIOTECH
MFG Item #:
8T01PP3040
Product Info
TUDERTECHNICA
Suction and delivery hose designed according to EN 12115 standards for food, cosmetic and pharmaceutical products, chemicals and solvents, except for chlorine trifluoride, chlorine and fluorine gas, oxygen difluoride, phosgene and molten alkalis (for ex. sodium). Designed for the chemical industry, foodstuff, pharmaceutical and cosmetic industry, where a flexible connection is required. The hose is produced with high quality elastomers, with excellent chemical and mechanical properties. Tested and certified hose by BUREAU VERITAS for use in Atex area (Ex-Zone). Manufactured according to GMP (Reg. (CE) 2023/2006). Not intended for use as an implant material. Not suitable for blood or human fluids.
Item Specifications
-
Wide corrugated, white with conductive chips, low friction material, non-marking when dragged on the floor, easy to clean, glossy. Oil, chemical, abrasion, ageing and ozone resistant. Meets FDA 21 CFR 177.1520.
-
Type O/T according to norm EN 12115 (R<10^6 O, R<10^9 O through the hose wall)
-
-40
-
2.50"
-
3.13"
-
Chemical Hose
-
65 Ft
-
Red/white/blue tape TUDERTECHNICA GLIDETECH® PTFE BIOTECH / Embossed according to norm EN 12115 TUDERTECHNICA PTFE EN12115:2021 DN SD PN 10 BAR O/T Q/Y
-
12.60"
-
600 PSI
-
EN12115
-
The operating temperature of the hose is directly dependent upon the specific fluid been conveyed and the length of time the fluid is in contact with the hose.
-
150 PSI
-
-40 - +302 Degrees F
-
Coil
-
8T01PP3040
-
Synthetic plies, stainless steel wire helices, a/s wire to discharge static electricity
-
Refer to guidelines for cleaning and sanitizing on Tudertechnica website
-
TEFLON™ PTFE, black, conductive, smooth, phthalates free
-
13 PSI
-
1.72 Lbs/Ft
Export To PDF
